|
This equipment provides a complete edge treatment,
slitting and trim removal system. It is a free-standing unit which
may be incorporated into the user's process. Equipped with electro-optical
sensors and fast-response actuators which keep the active machine
elements positioned properly with respect to the edge of the running
fabric.
 Click
here to view the full brochure
Features
- A resin dispensing and applying system which stores the
UV resin and dispenses it to the applicator system at an adjustable
ratio proportional to fabric speed. The applicator applies a
stripe of resin 1/4 wide at a point near the edge being followed
by the sensor system and near the other edge at a preset, fixed
distance from the first stripe.
- An ultraviolet curing irradiator and light shield system
cures the resin.
- Slitting knives are used to shear the fabric to a precise
width.
- A pneumatic conveying system is used for the edge trim removal.
Typical Industrial Fabric Application
- Fabric composition - "E" type glass with Silane treatment.
- Fabric weight - 0.6 to 7.0 ounces per square yard.
- Fabric process speed - up to 100 yards per minute.
- Fabric width - 38 to 62 inches.
- Resin application width - approximately 1/4" on each edge.
- Slitting tolerances - ± 1/16 inch over a range of ± 1 inch.
|
